GVE-T1 is E1/T1 to Ethernet Converter. E1 port can support BNC/75ohm and RJ45/120ohm optional.

GVE-T1 double protocol converter is a high performance,remote,self-learning Ethernet Bridge.Its compact size and low cost make it ideal for cost-sensitive bridging applications or as a LAN extender over bit stream type infrastructures.The main E1/T1 link may be clocked from the recovered receive clock or from an internal oscillator.This converter allows transmitting and receiving VLAN data packets.

*E1 comply with  ITU G.703,G.704,G.706,G.823
*T1 comply with ANSI TI.403-1999,ANSI TI.408,AT&T TR 62411
*Full comply  with IEEE 802.3/IEEE 802.3u/IEEE 802.1Q(VLAN)
*E1 Framed(N*64Kbps) and unframed(2.048Mbps) optional
*Frame mode support PCM30/PCM31
*Support CRC4
*T1 unframed (1.544Mbps) and transparent
*Ethernet port 10/100Mbps,Full/Half Duplex mode compatible
*Support internal clock,E1/T1 recovery clock
*Provide analog and digital loopback  test
*For E1 interface,75ohm(unbalanced) and 120ohm(balanced) optional
*For T1 interface 100ohm(balanced)
*Comprehensive LED indicators on front panel,convenient for the diagnosis of equipment working state
*Support Management
*-48V DC & 220V AC power supply optional
 

E1 & FE1  interface
Comply with ITU G.703,G.704,G.706,G.823
Rate:2.048Mbps;N*64Kbps(N=1~31)
Code type:HDB3
Impedance:75ohm unbalanced & 120ohm balanced optional
Physical connector:BNC coaxical  for unbalanced
                                   RJ45 twisted pair for balanced

T1 interface
Comply with ANSI TI.403-1999,ANSI TI.408,AT&T TR 62411
Rate:1.544Mbps
Code type:B8ZS
Impedance:100ohm balanced
Physical connector: RJ45 twisted pair for balanced

Ethernet interface
Comply with IEEE 802.3/IEEE 802.3u/IEEE 802.1Q(VLAN)
Rate:10/100Mbps,Half/Full auto-negotiation
MDI/MDI-X optional
Physical connector:10/100 Base-T(UTP);RJ45

Power supply
AC power:220V±10%,50Hz
DC power:-48V(optional)
Power:5W

Environment
Temperature:0～40℃
Humidity:0～95% RH