MDSL-E1 is a mixed modem which solves the application effectively that the fiber can not be arrived the final 3Km in the transmitting,it extend fiber signal via 2-wire.
With the up-to-date ASIC technique,MDSL-E1 is a mixed modem which solves the application effectively that the fiber can not be arrived the final 3Km in the transmitting,it extend fiber signal via 2-wire.It adopts SDSL technique to achieve the bandwidth up to 2320Kbps between the 2 LANs. Transmission distance up to 3.29Km(24AWG) or 2.51Km(26AWG).It is low operating cost,simple manipulation,convenient use,and be widely used as extender to connect 2LANs.

*Comply with ITUG.703, G.704 and G.706
*E1/G.703 line interface: 120ohm (RJ45) and 75ohm (BNC) optional
*Distance 3.29km in 24AWG(0.5mm) corresponding line and 2.51km in 26AWG(0.4mm corresponding line
*Use MSDSL technique
*Support 8 kind of speed rates from 256Kbps to 2320Kbps *Low cost, simple manipulation, conveniently use
*Comprehensive LED indicators on front panel,convenient for the diagnosis of equipment working state
*-48V DC & 220V AC power supply optional

Line  interface
Transmission rate:256Kbps,384Kbps,768Kbps,1024Kbps,1280Kbps,
1536Kbps,2048Kbps,2320Kbps
Transmission mode:synchronous full duplex;HDLC
Line impedance:135ohm
Interface:a pair of passive twisted pair,RJ45 jack

Data interface (E1 interface)
Comply with ITU G.703,G.704,G.706,G.823
Rate:N*64Kbps(N=1~32)
Code type:HDB3
Impedance:75ohm unbalanced & 120ohm balanced optional
Physical connector:BNC coaxical  for unbalanced
                                    RJ45 twisted pair for balanced

Power supply
AC power:220V±10%,50Hz
DC power:-48V(optional)
Power:5W

Environment
Temperature: 0~ +40 ℃
Humidity: 0~95% RH